BSOFT Digital IO Cards


In addition to Light-O-Rama controllers and various other types of controllers, Light-O-Rama can control your lights that are hooked up to BSOFT digital IO cards.


Note: This page does not apply to any digital IO cards except BSOFT digital IO cards. Light-O-Rama can control other digital IO cards, but if your digital IO card is not a BSOFT digital IO card, please see the separate help file page for such cards.




In order to use BSOFT digital IO cards with Light-O-Rama, your computer must have the Universal Library and the InstaCal program.


Limitations of BSOFT Digital IO Cards


Not all of Light-O-Rama's lighting effects are supported on BSOFT digital IO cards; to use effects other than "on" or "off" (such as twinkling, shimmering, fading, and brightness intensities other than "totally off" or "full brightness"), you must use Light-O-Rama controllers.


Unit IDs


Each BSOFT digital IO card has a unit ID, identifying which controller it is.  A controller will only react to lighting commands for its unit ID.  For a BSOFT digital IO card, the unit ID is a number between 0 and 99.


Circuit IDs


Each BSOFT digital IO card can control multiple strings of lights independently.  To identify each such string, it is assigned a circuit ID between 0 and 95.


Assigning Circuits to Channels


When a sequence is created using the Sequence Editor, each of its channels can be assigned a string of lights using the Channel Settings dialog or the Channel Configuration screen (the former may be more convenient for modifying a single channel, and the latter for modifying multiple channels at once).


For a BSOFT digital IO card, these allow you to set the unit ID and circuit ID assigned to a channel.  Without these being set, controllers will not react to lighting effects that you have put into your sequence.


For example, the following shows the Channel Settings dialog for a channel assigned to circuit 7 of a BSOFT digital IO card with unit ID 3:



The Channel Settings dialog for a BSOFT digital IO card


The Channel Settings dialog can be accessed by left-clicking on the channel's button, or by selecting "Change Channel Settings" from the channel button's right-click popup menu.  The Channel Configuration screen can be accessed by selecting "Channel Configuration" from the Tools menu.