Manage RGB Aggregates Dialog

Top  Previous  Next

Selecting "Manage RGB Aggregates" from the Sequencer's Sequence menu opens a dialog where you can view all of the RGB aggregates in a sequence. From this dialog you can:

 

Add a new RGB aggregate

Modify an existing RGB aggregate

Delete an RGB aggregate

 

 

The Manage RGB Aggregates dialog

The Manage RGB Aggregates dialog

 

Add a new RGB aggregate

 

Clicking the "+" icon will open a dialog allowing you to create a new RGB aggregate.

 

Enter the name for the new aggregate.

Use the filter box to narrow done the list of channels to choose from.

Click on a channel name that will occupy the red slot in the aggregate, then click the "Set Red" button. The name of the selected channel will appear below the button.

Click on a channel name that will occupy the green slot in the aggregate, then click the "Set Green" button. The name of the selected channel will appear below the button.

Click on a channel name that will occupy the blue slot in the aggregate, then click the "Set Blue" button. The name of the selected channel will appear below the button.

Click the "Create" button to create the aggregate.

 

It is not required to set all 3 slots. Setting only 1 or 2 of the slots is fine.

 

Creating a new RGB Aggregate

Creating a new RGB Aggregate

 

Modify an existing RGB aggregate

 

Double-clicking on an RGB aggregate name (or clicking a name to select it then clicking the pencil icon) will open a dialog allowing you modify the selected RGB aggregate. Here you can change the name, or change the channels assigned to any of the 3 slots. To change the channel assigned to a slot, use the same procedure described in creating an aggregate.

 

Modifying an RGB Aggregate

Modifying an RGB Aggregate

 

Delete an RGB aggregate

 

Click on an aggregate name to select it then click the red "X" icon to delete it. You can also use Shift-click and Ctrl-click to select multiple items before clicking the delete icon.