Configure Controller Unit IDs Using the Light-O-Rama Hardware Utility |
Top Previous Next |
After purchasing Cosmic Color Ribbons, you must configure them using the Light-O-Rama Hardware Utility. There are instructions on how to do this in the manual that comes with the ribbons. You will assign a unit ID to each controller, the same as you would with any other controller.
In addition, the Hardware Utility has a Cosmic Color Ribbon Configuration screen. Be sure to use the following settings on it:
•Unit ID Mode: Normal (single ID). •Channel Mode: Triples (RGB, RGB, ...) •Resolution: 50 pixels •Strips: 1 •DMX Mode: Both macro and RGB channels
The "Standalone Speed" setting does not matter with respect to the Light-O-Rama SuperStar Sequencer. |