Make that flood light any color you want
What can RGB floods do for you? Watch the following video submitted by one of our customers.
See the flood lights scattered around the house and yard in the above video? Each is a 10 watt LED based RGB flood light meaning the flood can be any color at any time. Each is individually controlled, and can be almost any color as well as intensity.
The 10 watt RGB flood is a single pixel (dumb) device. To use this RGB flood you will need a CMB24D controller. You will also need a 12VDC power supply available in our on-line store.
|RGB Flood (10 watts)||A few RGB flood colors (10 watts)||CMB24D RGB Controller|
RGB Flood Details:
- Input 12VDC, 10 Watts
- Constant Current drivers using PWM for intensity
- Weatherproof cast aluminum case (IP65)
- Three control channels (red, green, blue), common anode
- Light output: approximately 800 lumens when red, green and blue are at 100%
- Comes with 16′, four wire power cord power cord to attach to controller (use the CMB24D)
- Comes with 18″ dangle on the light for connecting to the above power cord
- Requires a DC-PWM driver for RGB effects (use the CMB24D)
- Requires a 12VDC power source
- 4.5″ w x 3.375″ h x 3.25″ deep
RGB Starter Package
Not real sure how all the pieces fit together. Consider putting together your own RGB starter package. We provide the CMB24D pixel controller, power supply, network adapter, software and your mix of dumb RGB ribbons or floods.
How does it all fit together?
1. The Light-O-Rama ShowTime Sequencing Suite works on your personal computer running Microsoft Windows and allows you to design your own shows. The ShowTime Sequencing Suite then runs your shows and sends the right commands at the right time to the various control channels. The ShowTime Sequencing Suite can even keep music synchronized to the controller commands.
2. Speakers to play the music accompanying your show are attached to the computer sound card.
3. Your personal computer communicates to the controllers using a device plugged into your computer’s serial or USB communications port. The blue line shows the standard serial output of your computer (RS-232 or USB) out of your PC where it enters our converter that transforms the signal to the native Light-O-Rama network protocol (the green line) that connects to our various types of controllers over standard computer network wire. We recommend Cat 5 LAN cables available from us and off-the-shelf from your local big box store in the computer section.
4. The Light-O-Rama CMB24D is connected to your network just like any other controller. The board is designed to drive eight dumb RGB devices. Each device has three channels (red, green, blue). The dumb RGB devices are typically 12 volts. Since we don’t know the types of RGB lights you will be using, you must provide your own DC power supply. Special note: Best practice is to mount the CMB24D in a weatherproof enclosure and make all wires exit the bottom so no water can touch the electronics.
5. The Light-O-Rama professional or residential high voltage AC light controllers include special effects such as simple on/off, intensities, smooth fading, twinkling, shimmering. Over 200 controllers can be daisy chained, mixed and matched on one LOR network giving you the ability to command thousands of channels. Need more channels? Add another Light-O-Rama network.
6. The Light-O-Rama professional or residential Ready-To-Go high voltage AC light controllers include special effects such as simple on/off, intensities, smooth fading, twinkling, shimmering. Over 200 controllers can be daisy chained on the LOR network giving you the ability to control thousands of channels. Need more channels? Add another Light-O-Rama network.